Soldering Irons

Soldering stained glass is more art than science. Some beginners are unhappy with the look of their solder lines. While there are many products available to make your soldering easier, the short answer for obtaining smooth, consistent solder lines is practice, practice, practice.

As you practice you will learn what products work for you. while 60/40 solder (60% tin/40% lead) is the most recommended alloy due to a low melting point, you may find that a different alloy gives you a better result.

The typical soldering iron produces more that enough heat to melt your solder, so you will probably want to use a temperature controller. Some soldering irons are available with built-in controllers . Modern stained glass irons have iron clad tips that eliminate the need to frequently file the soldering tip. Just wipe the hot tip on a block of sal-ammoniac to clean.

A thin coating of Anti-Sieze on the soldering iron tip will keep it from 'freezing' into the shaft when it is time to replace the tip. Use a touch of Anti-Sieze on the locking collar, or screw, as well.

Different size tips are available for fine detailed decorative soldering versus large window panels.

Again, your choice or flux is a personal preference. The fluxes we stock all do a fine job of chemically cleaning copper foil and lead or zinc came before soldering.


503F

Hakko RED 503 Soldering Iron

Hakko RED 503 Soldering Iron

$29.99


3025

Soldering Iron Control

Soldering Iron Control

$31.65


217960

Soldering Fume Extractor

Soldering Fume Extractor

$81.10


2034

1/4'' Soldering Tip

1/4'' Soldering Tip

$8.99


GLA40500

Glastar Soldering Tip Cleaner

Glastar Soldering Tip Cleaner

$6.99


GLA40510

Glastar Tip Cleaner Refill Sponge

Glastar Tip Cleaner Refill Sponge

$3.29


3801

Anti-Seize Compound 2.75 oz.

Anti-Seize Compound 2.75 oz.

$9.99


3035

Sal Ammoniac Tinning Block, 1/2 lbs.

Sal Ammoniac Tinning Block, 1/2 lbs.

$11.25