AF3P - Vitrigraph Kiln
Manufacturer Part Number: AF3P Vitri
Compact and portable for a kiln, this vitri kiln has a hole in the bottom that is used to pull stringers from. Inside measures 9" wide x 9" long x 9" deep. This kiln is side firing only. Kiln comes as a three piece or can be all attached with a hinged lid with a special order. This kiln can be converted for fusing or ceramics with the purchase of the optional second solid floor with no hole in the bottom. This kiln is designed to be a vitrigraph kiln and to be fired on a steel rack. Please seek proper instruction before attempting to fire the kiln and pull stringer. Do not use a vitri kiln on a table. Glass flows out the hole once the kiln reached about 1650F. Proper clothes, tools, high temp gloves, and a suitible area with a rack and large steel container to catch the hot glass are highly recommended. This kiln comes standard with the Orton Digital 3-key controller.
Note: The take apart version is shown. If a hinged lid and attached base are desired please let us know. If ordering an extra solid floor so that the kiln can be converted to a fusing kiln, then just the lid could be hinged on the floor not attached. Please specify when ordering!! Comes with base brick to be a barrier between the kiln and the steel wire shelving if needed. Base bricks or a kiln stand must be used to provide airspace between the kiln and the non-combustible surface under the kiln when using a solid bottom and firing the kiln.
Kiln Model: Vitrigraph Kiln
Interior Dimension: 9" length x 9" width x 9" depth.
Voltage: 120 volts, Amperage: 15 amps, Watts: 1800 watts
Recepticle: 5-15R Shipping Weight: 70# (UPS)
- Floor with Pre-drilled Hole
- Base Brick
- Solid second bottom (ships separately)
- Take-Apart or All One Piece
- Interior Dimension: 9" x 9" x 9"
- Max Temp: 2150F
- Volts: 120v
- Watts: 1800w
- Recepticle: 5-15R
- Breaker: 20
- Circuit Wire Gauge: 12
- Weight: 50 lbs
- Ship Weight: 70 lbs